Click to view770-889-2858
Click to view(770) 889-7876
Siemens Ac Drive
Measures, then you will use GS1-128, GS1 DataBar, or GS1 2D symbols. If you want to encode a URL into a barcode to make extended packaging information available to the end consumer, then you should use a GS1 2D symbol. If you need to barcode an outer case to be scanned in a logistics environment, and you want.
Description
GS1 series - our most affordable and compact inverter
◦1/4 and 1/2 hp, 115 VAC single phase
Gs1 Drive Manual
Jul 26, 2013 (VID-CL-0018) - Live demo of how to control a 3-Phase AC motor using a GS1 series drive and a CLICK PLC. AutomationDirect's GS series variable AC drives were designed with simplicity and robustness in mind. We worked hard to make these drives the easiest to use in the industry. The GS series was specifically designed to be able to handle the higher range of American voltages. GS1 Series - 115/ 230 VAC input - 230 VAC output.
◦1/4, 1/2 and 1 hp, 230 VAC single phase / 3-phase
◦2 hp, 230 VAC 3 phase
The GS1 series of AC drives offers V/ Hz control with advanced application features.
•These drives can be configured using the built-in digital keypad (which also allows you to set the drive speed, start and stop, and monitor specific parameters) or with the standard RS485 serial communications port.
•Standard GS1 features include one analog input, four programmable digital inputs and one programmable normally open relay output.
•Typical applications include conveyors, fans, pumps, shop tools
GS1 AC Line Reactors
Input and output line reactors are available for GS1 AC Mini Drives
•Input line reactors protect the AC drive from transient overvoltage conditions, typically caused by utility capacitor switching. The input line reactor also reduces the harmonics associated with AC drives. Input line reactors are recommended for all installations.
•Output line reactors protect the motor insulation against AC drive short circuits and IGBT reflective wave damage, and also “smooth” the motor current waveform, allowing the motor to run cooler. They are recommended for operating “non-inverter-duty” motors and when the length of wiring between the AC drive and motor exceeds 75 feet.
•NOTE: If you purchase an AC line reactor with your AC drive order, you'll receive an an extra year of warranty coverage in addition to the standard warranty period.