- Campbell Hausfeld User Manual 2 3 Hp Paint Sprayer Parts
- Campbell Hausfeld User Manual 2 3 Hp Paint Sprayer Model 847
- 2^-3 How To Solve
2
Operating Instructions and Assembly Instructions
Airless Paint Sprayers
Sprayer - 4 PSI, 0.06 GPM, Model# HV2002 Campbell Hausfeld 1/2 HP, 0.28 GPM Airless Paint Sprayer CAMPBELL HAUSFELD HV3500 HVLP Paint Sprayer, 3 Stage, 1 qt. Care Plans cover 100% of the cost for repair or replacement, including shipping charges for the exchange.
Description
Airless paint sprayers are capable of spraying a wide variety
of latex, oil-based, and alkyd paints, as well as stains,
preservatives and other non-abrasive finishes.
These sprayers are also powerful and versatile enough to
be used with a variety of options (roller attachment, extra
lengths of hose, etc.) to make it an even more efficient tool.
NOTE: Guns pictured in illustrations may be different than
the one included with your unit.
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Application Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General Safety Information . . . . . . . . . . . . . . . . . . . . . . . . 3
Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Spraying Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Cleanup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Spray Gun Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Maintenance Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Replacement Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Force Feeding Pump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Table of Contents
Application Chart
Coating
Can Use
Do Not Use
Tip Size **
Spray Pressure
Oil Base Stain
x
.011 - .013 inch
800 + psi
Wood Sealer
x
.011 - .013 inch
800 + psi
Concrete Sealer
x
.011 - .013 inch
800 + psi
Enamel
x
.011 - .013 inch
1500 + psi
Varnish
x
.011 - .017 inch
1500 + psi
Non-Metal Flake Aluminum Paint
x
.011 - .017 inch
1500 + psi
Vinyl Latex Paint
x
.013 - .017 inch
1700 + psi
Vinyl / Acrylic Latex Paint
x
.013 - .017 inch
1700 + psi
Acrylic Latex Paint
x
.013 - .017 inch
1700 + psi
Oil Base Paint
x
.013 - .017 inch
1700 + psi
Oil and Water Based Primer
x
.013 - .017 inch
1700 + psi
V. V/A & A Latex Stain
x
.013 inch
1700 + psi
Textured Coatings
x
N/A
Campbell Hausfeld User Manual 2 3 Hp Paint Sprayer Parts
Elastomerics
x
.017 - .021 inch
2000 + psi
Asphalt Coating
x
.015 - .017 inch
Wood Restorer
x
N/A
Block Filler
x
N/A
All Other Materials Not Listed - Call Technical Support at 1-800-626-4401.
**Refer to maximum tip size in the specifications chart.
Campbell Hausfeld User Manual 2 3 Hp Paint Sprayer Model 847
**
www.chpower.com
Airless Paint Sprayers
9
Operating Instructions and Assembly Instructions
www.chpower.com
Spraying Instructions
(Continued)
INTERMITTENT USE
If you are spraying and decide to stop
for several minutes, lock the spray
gun trigger and submerge the tip in
a container of water (See Figure on
page 8). This will prevent paint from
hardening in the tiny spray opening
and clogging the tip. Be sure to release
the pressure in the system and turn the
unit off.
CLEARING CLOGS
REVERSIBLE TIP: (IncLudEd)
1. Rotate the tip to the CLEAN position
(See Figure 1 on page 8).
2. Point gun in a safe direction and
spray. This should clear tip of any
blockage.
3. Rotate the tip back to the SPRAY
position and continue spraying (See
Figure 2 on page 8).
4. If clogging continues, replace gun
filter and consider straining the
paint prior to use.
Equipment damage
can occur if a needle
2^-3 How To Solve
or sharp object is used to clean the tip.
Tungsten carbide is brittle and can be
chipped.
HOW TO CHANGE SPRAy TIPS
It may be necessary to change spray tips
during a paint job. Follow these steps
for safe, easy tip changes.
1. Depressurize and turn off unit per
manufacturer’s instructions.
2. Engage gun trigger lock.
3. Pull red tip insert
out of spray base
and replace with
different tip, fully
inserting tip into base.
HOW TO ATTACH ROLLER ACCESSORy
1. Depressurize and turn off unit per
manufacturer’s instructions.
2. Engage gun trigger lock.
3. Remove spray base, tip, seal and
washer assembly.
4. Attach roller accessory (AL2275
shown) to airless spray gun. If
needed use thread adapter and
washer between roller and spray gun
as shown.
Figure - Attach roller accessory to spray gun